Handles for Cages and Topplates, compatible with anti-twist 3/8" safeguards.

Chrosziel Light weight support for Sony Burano, Venice 2 and Venice camera, with integrated shoulder pad, 2 rosettes, 401-FS7/5-03 Tripod Adapter Plate, rear rods optional (401-FS7-5R-01)

Sony Burano, Venice 2 and Venice Cine Bridgeplate with 19mm and 15mm rods for use with Bridge plates.

Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties.  The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set. 

The Chrosziel Burano Mount is a Sony Burano camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Burano Mount is used with cine lenses with LDS or Cooke /i-Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. Using the Burano Mount with an ENG servo motor-controlled broadcast lens, the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony Burano GP-VR100 hand grip, Sony FX9 top handle, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through the Sony Burano camera. The Meta Mount is shimmable with the included shim set.Key Features: ·        Sony Burano Mount Camera to PL mount Lens ·        Electronic contacts for metadata communication and lens control ·        Lens metadata displayed in camera and recorded to file ·        Shimmable with included shims ·        Full focus/Iris/Zoom control on servo motor ENG lenses Technical data: - Burano Mount camera to PL mount lens - Contact and electronics for Metadata communication - 12-pin Hirose out for ENG lens control - Mounted with 5 screws to the native camera body - USB Type min A-B (for firmware updates only) - Power supply 10-16V (Lemo compatible 0B 5-pin) - Power consumption max. ca. 350mAh @ 12V - Part number MA-BURPL-HR12 - EAN number: In the box: - 1x Burano Mount PL adapter (MA-BURPL-HR12) - 1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo) - 1x F55-A2-P-CAM - 1x Shim Set - 1x USB Mini Adapter Sign up for BURANO MOUNT email updatesDon't miss future news about the BURANO MOUNT and subscribe to the BURANO MOUNT Email list. Yes, keep me updated about the BURANO MOUNT and send me future news about it.NOTE: we will not use your email for any other emails not related to the Burano Mount.

The Chrosziel Meta Mount is a Sony E camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Meta Mount is used with cine lenses with LDS or Cooke/i Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. When the Meta Mount is used with an ENG servo motor-controlled broadcast lens the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony FX9 / FX6 / FX3 hand grips, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through a Sony E mount camera. The Meta Mount is shimmable with the included shim set for the E-mount.Key Features: ·        Sony E Mount Camera to PL mount Lens ·        Electronic contacts for metadata communication and lens control ·        Lens metadata displayed in camera and recorded to file ·        Shimmable E Mount ·        Full focus/Iris/Zoom control on servo motor ENG lenses Technical data: - E Mount camera to PL mount lens - Contact and electronics for Metadata communication - 12-pin Hirose out for ENG lens control - 3/8th lens support socket - USB Type min A-B (for firmware updates only) - Power supply 10-16V (Lemo compatible 0B 5-pin) - Power consumption max. ca. 350mAh @ 12V - Part number MA-EPL-HR12 - EAN number: 4250618846934 In the box: - 1x Meta Mount E-to-PL adapter (MA-EPL-HR12) - 1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo) - 1x F55-A2-P-CAM - 1x Shim Set, E-Mount side - 1x USB Mini Adapter Sign up for META MOUNT email updatesDon't miss future news about the META MOUNT and subscribe to the META MOUNT Email list. Yes, keep me updated about the META MOUNT and send me future news about it.NOTE: we will not use your email for any other emails not related to the Meta Mount.

Chrosziel has expanded the successful CDM Zoom Servo Drive family. The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-Z2 fits seamlessly into the operating functions of the Sony cameras of the FX9 / FX6 / FS7 / FS5 series. The servo drive is controlled via the zoom rocker on the handle. The motor control can be addressed via Sony's camera-specific protocol and also works independently of the camera signals when a digital LANC zoom rocker is plugged directly into the servo.Due to the included Chrosziel Flexi toothed ring (#206-30), the Zoomer can be used with almost any zoom lens even without standard cine gearing. The multi-function handgrip, which in addition to the recording function and a zoom rocker also provide control over the camera menu and other freely selectable functions, are extremely popular on current video cameras with large sensors and are indispensable for effective operation. The Chrosziel Universal Zoom Servo Drive now allows optimal use of all manual zoom lenses together with the multi-function handgrip. For this purpose, the Zoomer is slid onto a 15mm rod and swiveled onto the zoom lens. Two plug-in cables establish the connection with the camera. One cable is used for the power supply from the camera battery, the second for the connection to the control commands between the handle and the camera. When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7 and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals. For setup with the Sony PXW-FX9 camera, a Y-cable is used that accepts the Sony multi-connector and connects to both the input jack of the Zoomer and the input jack of the camera. For the Sony ILME-FX6 camera, a Y-cable is used and connects the 3.5mm connector of the Sony handgrip, input jack of the Universal Zoom Servo Drive, and the Sony camera.  FEATURESUniversal zoom motor The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via Sony and Digtial LANC handgrip The Sony FX6 / FX9 / FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with digital LANC protocol are compatible too, e.g. mounted handgrip. Camera control signals forwarded Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop). Panasonic DC-BS1H & DC-BGH1 box cameras A recent firmware updated has made the CDM-UNI-Z2 compatible with the Panasonic BS1H and BGH-1 box cinema cameras when used with a Manfrotto MVR901EPLA and MVR901ECLA control handles as well as the digital LANC Libec ZFC-L and ZC-LP zoom controllers. Technical dataPower supply 10-30V (Lemo compatible 0B 5-pin) 2.5mm socket (control command In) 3.5mm socket (control command In&Out)USB Type min A-B (firmware updates) Torque 0.5Nm Power consumption max. approx. 350mAh @ 12VIN THE BOX 1x CDM-UNI-Z2 Digital motor unit 1x LANC cable 1x LANC extension cable 1x MN-AB-A90 (power supply cable 12 Volt A/B D-Tap – angled 90° rotated 0B 5pin) 1x 206-30 Flexi Gear Ring (Ø 60-120mm) 1x Gear Drive, mod. 0.8 (Ø 40mm) 1x CAB-FX9 for Sony PXW-FX9 compatibility 1x CAB-FX6 for Sony PXW-FX6 compatibility USB Mini AdapterSign up for ZOOMER email updatesDon't miss future news about the ZOOMER and subscribe to the Zoomer Email list. Yes, keep me updated about the ZOOMER and send me future news about it.NOTE: we will not use your email for any other emails not related to the Zoomer. hbspt.forms.create({ region: "na1", portalId: "2769585", formId: "aae38178-6132-4e21-b6b4-bd9ac7e2828f" });

401-BUR-ADV-KIT: THE COMPLETE LWS CAGE FOR THE SONY BURANOThe Chrosziel Advance Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting or tripod mounted studio work.  Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used Right and Left front side brackets with more mounting points Rear right side bracket that secures to the top plate and the camera with 2 extra screws to support heavier accessories The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN  LWS base plate with integrated shoulder pad 1x 401-BUR-TOP  Top plate with 15mm rods 1x 401-BUR-SBF  Front side bracket right 1x 401-BUR-SBL Front side bracket Left 1x 401-BUR-SBR  Rear side bracket 

401-BUR-STD-KIT: THE LWS RUN-N-GUN CAGE FOR THE SONY BURANOThe Chrosziel Standard Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting hand-held or tripod mounted.  Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used  The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN  LWS base plate with integrated shoulder pad 1x 401-BUR-TOP  Top plate with 15mm rods 

Chrosziel Top-Plate for Sony Burano, built-in Ø15mm rod support, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable). The top-plate is split into two parts allowing the use of either the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics for maximum Run&Gun shooting.401-BUR-TOP: THE CHERRY ON THE SONY Burano “CAKE”The Top Plate comes with rod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard and an optical marker for attaching a measuring tape. Additionally the top plate inherits various mounting points to move the Sony Burano cable clamps to the desired position. Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable) top-plate split into two parts for the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics

Chrosziel Rear-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The rear-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the body-owned two threadings.401-BUR-SBR: THE SONY Burano Rear Side BracketThe Rear Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Sony Burano camera body. Rear Side Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8" threads mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Sony Burano camera body