MatteBox 450W Super Wide MatteBox  for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox  French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm

MatteBox 450R1 The Chrosziel 450-R11 Matte Box MB easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact cinema cameras, camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a single stage filter holder that can be adjusted to accept 4 x 5.65" and 4 x 4" glass filters. The 450-R11 Matte Box also includes a French flag, 1 rotatable filter holder multi format that can accept 4 x 4" and 4 x 5.65" glass filters, a bracket for 15mm support rods, and cover end plate with thread 114 + 110mm.What's in the Box:French flag1 rotating filterholder multi format 4x4/4x5.650 (410-04)Bracket for Ø15mm rodsEnd plate with thread Ø114/110mm.

MatteBox 450R2-DSWC, Direct-Swing-Away System with Double-Rotating-Filter Stage, Lightweight, robust, and ready for production, Chrosziel's MB 450R2 Swing-Away Matte Box can complement a wide range of cameras, from smaller camcorders or mirrorless cameras, up to larger cinema cameras and ENG camcorders with an outer lens diameter of up to 114mm (lenses with a diameter smaller than 110mm may require additional accessories for full compatibility). With the included top flag and 16:9 mask, glare from outside the frame can be effectively controlled for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.The rear stage accepts 4x4" filters only, while the front stage will accept 4x4 as well as larger 4x5.65" filters. Both stages rotate, enabling the use and control of polarizing as well as graduated filters. For further possibilities, the MB 450R2 can be upgraded in the future with a separately available third rotating filter stage.What's in the Box: 450-R21 Mattebox Mask 16:9 french flag (450-11) Pivot mechanism for side wings (option)Rotatable filterholders 4x4 (402-12) and multi-format4x4/4x5.650 (410-04)Clamp-bracket for Ø15mm rodsCover end plate with thread Ø114/110mm

MatteBox 450R3-DSWC, Direct Swing Away System with Triple-Rotating-FilterStage, The Chrosziel 450-R31 Triple Stage - DSW Matte Box easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact cinema cameras, camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a triple rotating filter stage, a 16:9 mask, three filter holders that can be adjusted accepting 4 x 5.65" and 4 x 4" glass filters, a French flag, and pivot mechanism for side wings (sold separately). The Chrosziel 450-R31 Triple Stage - DSW Matte Box also includes a bracket for 15mm support rods, and a cover end plate with thread 114 + 110mm. For cameras with interchangeable lenses, the DSW Direct-Swing-System offers unparalleled comfort for quick and easy lens change.What's in the Box:450-R3DC Mattebox Mask 16:9 French flag (450-11) Pivot mechanism (for sidewings)Rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04) Clamp-bracket for Ø15mm rodsEnd plate with thread Ø114/110mm

MatteBox 450R3 with Triple-Rotating-FilterStage, The Chrosziel 450-R31 Triple Stage Matte Box easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a triple rotating filter stage, a 16:9 mask, three filter holders that can be adjusted accepting 4 x 5.65" and 4 x 4" glass filters, a French flag, and pivot mechanism for side wings (sold separately). The Chrosziel 450-R31 Triple Stage Matte Box also includes a bracket for 15mm support rods, and a cover end plate with thread 114 + 110mm.What's in the Box: MB450-R31 Mattbox Mask 16:9French flag (450-11)Pivot mechanism (for optionally use of side wings)Rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04)Bracket for Ø15mm rodsCover end plate with thread Ø114/110mm

Turn your portable Blackmagic URSA Mini PRO G2 or Ursa Mini  PRO 12K into a studio production powerhouse with this Chrosziel 450-R2 Matte Box + Follow Focus Kit. This kit includes Chrosziel's MB450-R2 matte box and DV StudioRig follow focus. These can both mount to a separately available LWS support via 15mm rods. A MOD 0.8 drive gear is included with the follow focus to drive cine standard lenses, or still-photography lenses adapted with the included lens gear. See below for more information on the items included in this kit.What's in the Box:MatteBox MB450French flag (450-11)Pivot-mech. for optional side-wings2 rotating filterholders: 4x4 (402-12)+ multi 4x4/4x5.650 (410-04)Bracket for Ø15mm rodsEnd plate w. thread Ø114/110mm  450-20 Flexi-Insertring 110:75/98mm  206-05S DV StudioRig follow focus  206-12 Gear drive DV Rig 0.8, Ø 36,8mm  206-30 FlexiGearRing Ø 60-120mm

Kit MB450R2 + FollowFocus: 450-R2 MatteBox mit French Flag (450-11), Montagestangen (für Seitenflügel), 2 drehb. Filterhalter: 4x4 (402-12) und 4x4/4x5.650 (410-04), Halterung für Ø15mm Rohre, Abschlußplatte mit Gewinde Ø114/110mm, 450-22 Flexi-Insertring 110:50/85mm 450-20 Flexi-Insertring 110:75/98mm 206-05S DV StudioRig, follow focus 206-12 Zahnrad DV Rig 0.8, Ø 36,8mm 206-30 FlexiZahnRing Ø 60-120mm Dieses Kit ist speziell zusammengestellt für die Blackmagicdesign Cinema Kamera mit Foto Objektiven und Cine Primes bis zum Durchmesser von 114 mm. Der FlexiInsertring schützt vor Lichteinfall bei Objektiven mit 50-85 mm Durchmesser. Primes mit 114 mm Durchmesser passen direkt ohne Zwischenring in die MatteBox. Der Follow Fokus DV StudioRig ist mit einem mittleren Antriebsrad ausgestattet. Bei sehr kleinem Stellwinkel eines Objektivs empfehlen wir unseren kleineren Antrieb 206-14. Der FlexiZahnring MK II ist ein Garant für präzises und ruckfreies Schärfenziehen und das obwohl er sich zwischen 60 und 120 mm an das Objektiv anpasst. Es gibt keinen zweiten flexiblen Ring, der so sanft läuft. Wenn Sie mehrere Objektive fest ausrüsten wollen, empfehlen wit Ihnen den Vierer-Pack zum 2er Preis - 206-30X4

Kit MB 450W for Canon EOS C100, 300, 500: 450W-20 Super Wide MatteBox, french flag (450-11), 2 rotating filterholders multiformat 4x4/4x5.650 (410-04), bracket f. Ø15mm rods, clamp plate Ø 130mm 411-67 Ring 130:110mm (screw-in) 450-20 Flexi-Insertring 110:75/98mm 401-C300MKIIA LWS 15 for Canon EOS C Series

Side wings incl. pivot mechanism for MB 450

Set Side wings for MatteBox 450

Set Pivot mechanism for side wings on MatteBox 450 (length 68mm)

French Flag for MB 450 +455-R1 foldable

The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 75-98mm adjustable step-down ring. The ring is designed to work with the MB-450 matte box series and provide light protection for a variety of wide angle and standard lenses with diameters of 75 to 98mm 

The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 50-85mm adjustable step-down ring. The ring is designed to provide light protection with the MB-450 matte box series and will fit a variety of wide angle lenses with diameters between 50 and 85mm

Insertring Ø 110:80 mm

Insertring Ø 110:80 mm (24mm tube-shaped) for telescoping photo lenses

Adaptor Ø 110:81 mm outer diameter MB 450

Insertring Ø 110:85 mm

Insertring Ø 110:85 mm (22mm tube-shaped) for telescoping photo lenses.

Insertring Ø 110:86 mm - not for MB 450

Insertring Ø 110:87mm, e. g. for Cooke Panchro lenses

Insertring Ø 110:90 mm

Adaptor Ø 110:91 mm outer diameter MB 450

Insertring Ø 110:95 mm

Insertring Ø 110:95 mm to use with only 1 filterholder up to focal length 4.5mm

Insertring Ø 110:98 mm

Insertring Ø 110:100 mm

Insertring Ø 110:105 mm

Insertring Ø 110:104mm (e.g. for Cine Xenare Mrk III)

The Chrosziel C-411-72 is a step down ring designed to go from a 110mm thread down to 72mm for the MB450 and MB456  Matteboxes. The ring is used primarily for the Sony HVR-Z5U, Panasonic AG-HPX170, and Panasonic AG-HMC150 camcorders. The ring is suitable for use with Chrosziel's CMB-R10, R20 & R30 sunshades as well.

Chrosziel's 110-77mm Step Down Ring is designed to allow the 110mm filter stage of the MB450, MB456, CMB-R10, CMB-R20, and 415-02F110 matte boxes to be clamped onto a camera lens with a diameter of 77mm. This gives you the ability to use rotating 4x4 filters on a variety of camcorders and lenses.Adapter Ring Ø110:M 77 mm screw-in, for DV/HDV Camcorder.

Step-down Ring Ø 110:80 mm

The Chrosziel 110-82mm Step-Down Ring for Sunshade uses an overlapping rim that assures a light-free connection between your 82mm lens and the 110mm clamp adapter of the MB456 or MB450 if fitted for 110mm or the SD 412 (412-02F110 version only), CMB-R10, and CMB-R20 Sunshades.Adapter Ring Ø110:M 82 mm (screw-in DV/HDV Canon + Panasonic)

The Chrosziel 110-85mm Step-Down Ring for Sunshade uses an overlapping rim that assures a light-free connection between your 85mm lens and the 110mm clamp adapter of the MB456, MB450 and 412-02F110, MB-R10, and MB-R20 Sunshades.Step-down Ring Ø 110:85 mm

Step-down Ring Ø 110:86 mm

Step-down Ring Ø 110:87 mm

Step-down Ring Ø 110:90 mm

When the outside diameter of a professional camera lens is 95mm the user needs a step-down ring to adapt if they are going from the 11mm versions of the MB450, MB456, MB415 and SD412 (412-02F110 version only) matte boxes. This step-down ring adapts from 110mm Chrosziel Sunshade's to cameras with 95mm lens opening. Step-down Ring Ø 110:95 mm

Step-down Ring Ø 110:95 mm to use with only 1 filterholder up to focal length 4.5mm

Step-down Ring Ø110:95mm for ENG wide angle lenses e.g. Canon F4.3mm (f. SD 412-02F110)

Step-down Ring Ø 110:96 mm

Step-down Ring Ø 110:98 mm

Step-down Ring Ø 110:98 mm with recess for wide angle converters. typical: 0.75 times by 16x9 Inc.

Step-down Ring Ø 110:100 mm

Step-down Ring Ø 110:104 mm, for combination with srew-in-rings of type 104 to Mxx.

Step-down Ring Ø 110:105 mm