MatteBox 450R1 The Chrosziel 450-R11 Matte Box MB easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact cinema cameras, camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a single stage filter holder that can be adjusted to accept 4 x 5.65" and 4 x 4" glass filters. The 450-R11 Matte Box also includes a French flag, 1 rotatable filter holder multi format that can accept 4 x 4" and 4 x 5.65" glass filters, a bracket for 15mm support rods, and cover end plate with thread 114 + 110mm.What's in the Box:French flag1 rotating filterholder multi format 4x4/4x5.650 (410-04)Bracket for Ø15mm rodsEnd plate with thread Ø114/110mm.

MatteBox 450R3 with Triple-Rotating-FilterStage, The Chrosziel 450-R31 Triple Stage Matte Box easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a triple rotating filter stage, a 16:9 mask, three filter holders that can be adjusted accepting 4 x 5.65" and 4 x 4" glass filters, a French flag, and pivot mechanism for side wings (sold separately). The Chrosziel 450-R31 Triple Stage Matte Box also includes a bracket for 15mm support rods, and a cover end plate with thread 114 + 110mm.What's in the Box: MB450-R31 Mattbox Mask 16:9French flag (450-11)Pivot mechanism (for optionally use of side wings)Rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04)Bracket for Ø15mm rodsCover end plate with thread Ø114/110mm

Lightweight, robust, and ready for production, the Chrosziel MB 450-R21 Matte Box with double-rotating filter stages can complement a wide range of cameras, from smaller camcorders or mirrorless cameras, up to larger cinema cameras and camcorders with cine and ENG lens having a diameter of up to 114mm (lenses with a diameter smaller than 110mm may require additional accessories for full compatibility, see list lower down the page). With the included top flag and 16:9 mask, glare from outside the frame can be effectively controlled for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side wings and bottom flags.What's in the Box:MB450 Mattebox Mask 16:9French flag (450-11)Pivot mechanism for side wings2 rotating filterholders - 4x4 (402-12) and multiformat 4x4/4x5.650 (410-04)Rod clamp for Ø15mm rodsEnd plate Ø114/110mm

MatteBox 450W Super Wide MatteBox  for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox  French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm