The Chrosziel Burano Mount is a Sony Burano camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Burano Mount is used with cine lenses with LDS or Cooke /i-Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. Using the Burano Mount with an ENG servo motor-controlled broadcast lens, the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony Burano GP-VR100 hand grip, Sony FX9 top handle, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through the Sony Burano camera. The Meta Mount is shimmable with the included shim set.Key Features: ·        Sony Burano Mount Camera to PL mount Lens ·        Electronic contacts for metadata communication and lens control ·        Lens metadata displayed in camera and recorded to file ·        Shimmable with included shims ·        Full focus/Iris/Zoom control on servo motor ENG lenses Technical data: - Burano Mount camera to PL mount lens - Contact and electronics for Metadata communication - 12-pin Hirose out for ENG lens control - Mounted with 5 screws to the native camera body - USB Type min A-B (for firmware updates only) - Power supply 10-16V (Lemo compatible 0B 5-pin) - Power consumption max. ca. 350mAh @ 12V - Part number MA-BURPL-HR12 - EAN number: In the box: - 1x Burano Mount PL adapter (MA-BURPL-HR12) - 1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo) - 1x F55-A2-P-CAM - 1x Shim Set - 1x USB Mini Adapter Sign up for BURANO MOUNT email updatesDon't miss future news about the BURANO MOUNT and subscribe to the BURANO MOUNT Email list. Yes, keep me updated about the BURANO MOUNT and send me future news about it.NOTE: we will not use your email for any other emails not related to the Burano Mount.

The Chrosziel Meta Mount is a Sony E camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Meta Mount is used with cine lenses with LDS or Cooke/i Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. When the Meta Mount is used with an ENG servo motor-controlled broadcast lens the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony FX9 / FX6 / FX3 hand grips, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through a Sony E mount camera. The Meta Mount is shimmable with the included shim set for the E-mount.Key Features: ·        Sony E Mount Camera to PL mount Lens ·        Electronic contacts for metadata communication and lens control ·        Lens metadata displayed in camera and recorded to file ·        Shimmable E Mount ·        Full focus/Iris/Zoom control on servo motor ENG lenses Technical data: - E Mount camera to PL mount lens - Contact and electronics for Metadata communication - 12-pin Hirose out for ENG lens control - 3/8th lens support socket - USB Type min A-B (for firmware updates only) - Power supply 10-16V (Lemo compatible 0B 5-pin) - Power consumption max. ca. 350mAh @ 12V - Part number MA-EPL-HR12 - EAN number: 4250618846934 In the box: - 1x Meta Mount E-to-PL adapter (MA-EPL-HR12) - 1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo) - 1x F55-A2-P-CAM - 1x Shim Set, E-Mount side - 1x USB Mini Adapter Sign up for META MOUNT email updatesDon't miss future news about the META MOUNT and subscribe to the META MOUNT Email list. Yes, keep me updated about the META MOUNT and send me future news about it.NOTE: we will not use your email for any other emails not related to the Meta Mount.

MagNum Mini Single Channel, Lens Control for focus, 2.4 GHz, with Power Booster, camera RUN start/stop, spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-100T Transmitter (hand unit) w. hand strap and neck strap (STR2), MN-BAT Battery type Sony FM50, MN-CH Charger, manual.

MagNum Mini Superior Single Channel, Lens Control for focus, 2.4 GHz, with VariLock II and VariFluid Hand wheel, DMX-Signal Input, Power Booster, camera RUN start/stop, spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-150T Transmitter (hand unit) w. hand strap and neck strap (STR2), MN-BAT Battery type Sony FM50, MN-CH Charger, manual.

MagNum lens control for focus, iris and camera record start/stop, several frequencies in the range of 2,4 GHz a. 433 MHz. USB port, serial interface, BNC socket for cable or antenna, hotkeys. Compatible also for wired analogue zoom demands. Scope of delivery: operating unit/transmitter w. hand strap (MN-200T), motorcontrol unit/receiver (MN-200R), 2 antennas, battery type FM50/55, charger, neck strap, manual (add. needed: cables, bracket and digital motors)

The Chrosziel CDM-PREM-FIZ Full Servo Drive Unit was developed exclusively with all three Fujinon Premista Lenses and is field installable. This compact and ergonomic design allows you to integrate the all-manual “cine style“ Fujinon Premista lens into your broadcast, multi-camera and remote head workflows in a very simple way, because you have all components in one housing.Three perfectly positioned drive gears engage the Fujinon Premista lens with a high degree of precision, employing three powerful digital cine motors. The Chrosziel CDM-PREM-FIZ is particularly useful for cinematic multicam, ENG and OB work, where zoom and focus can be controlled from standard Fujinon TVstyle tripod controls or the handheld zoom rocker switch. It supports remote head and robotics applications via the Hirose 20pin Fujinon remote interface, which also allows the Chrosziel Magnum wireless FIZ unit and all other compatible brands of FIZ to control the drive’s focus, zoom and iris. This Project is supported by the Federal Ministry for Economic Affairs and Climate Action (BMWK) on the basis of a decision by the German Bundestag. TECHNICAL SPECIFICATIONS• Demand Input Focus (analog/digital 16-bit)• Demand Input Zoom (analog/digital 16-bit)• Standard Fujinon Digipower Control Protocols• External Power recommended for maximum performance• /i and eXtended data pass thru• Weight: approx. 1.2 KG (2.6 lbs)CONNECTOR OVERVIEW• Power: Lemo-compatible 0B.305• Lens-Port: 12 Pin-Hirose socket• Focus-Demand 12 Pin Hirose Socket (Fujinon standard – Pinout)• Zoom-Demand 12 Pin Hirose Socket (Fujinon standard – Pinout)• Remote (Hirose 20 Pin)KEY FEATURES• Compatible with Premista 19-45, 28-100, 80-250• /i eXtended data pass thru for augmented/ virtual production workflows• User installable drive unit• Lightweight (approx. 1.2 kg/2.6 lbs.)• Fujinon Digipower Protocols enable seamless use in robotic and remote head applications• USB Port for software updates• Wide range of power input (12V-30V DC)• Built-in adjustable speed zoom rockerWhat is in the box?• 1x CDM-PREM-FIZ – Full servo drive• 1x MN-AB-A - Power Cable 12 Volt A/B D-Tap• 1x AL2-INTF-LP – Connection Cable Lensport• 1x Allen Key