Y-cable for Sony FX9 - Sony Multi plug and socket to 3.5mm serial male Jack (90 degree),35cm, only for servo drives version 2

Light weight support for Sony PXW-FX9, with integrated shoulder pad, 2 rosettes, V- Lock-Plate, 401-FS7/5-03 Tripod Adapter Plate2 rods Ø 15mm, l. 205mm.LIGHTWEIGHT SUPPORT (LWS) FOR SONY FX9 CAMERAS  Features of the LightWeight Support 401-FX9: new comfortable ergonomic soft shoulder pad, two rosette (right and left), numerous 3/8″ & 1/4″ fastening points incl. ARRI anti-twist safeguard, compatibility to QuickRelease and tripod adapter plates and optional rear rod support.The LightWeight Support can be modularly used with industry standard QuickLock Plates. The Chrosziel QuickLock Plate 401-150 is suitable for all cameras which are equipped with wedge plate connections (V mount) in the front and a mounting bracket behind the shoulder support. The QuickLock Plate connects the camera quickly and easily, and even after decades of use. LIGHT AS A FEATHER: THE SHOULDER PAD OF THE 401-FX9 LIGHTWEIGHT SUPPORT The shoulder pad under the light support can be moved over a wide range. A lever clamp mechanism with external lever access allows the user to slide it on the shoulder. This allows him to quickly correct the balance of the camera during operation. The pad is tapered to fit the shoulder and has an elevation toward the neck for side protection. After fully opening the lever clamp, the pad can be removed and inserted rotated 180 degrees, so that one can equally use the light support on the left or right shoulder. The pad itself is manufactured using a new process from the automotive industry in a special mold with a molded core surrounded by an elastic material with a strong durable outer shell. This multi-layer construction results in high comfort and fatigue-free work.User feedback played a key role while designing the LightWeight Support 401-FX9.The result is a completely re-design of the shoulder pad:Use of a two component cushioning material Shoulder pad adapts to the physical conditions when under pressure Shoulder pad is adjustable (forward and backward) FITS PERFECTLY Secure hold with tripod adpter plate 401-FS7/5-03The standard scope of delivery of the LightWeight Support 401-FX9 consists of a tripod adapter plate 401-FS7/5-03. With the tripod adapter plate the lightweight support can be directly and securely mounted to a tripod without a VCT QuickLock Plate (universal plate). It is just necessary to replace the pre-assembled V Lock by the tripod adapter plate.CLAMPS ONLY WHEN NEEDED: REAR ROD CLAMP FOR 15 MM RODS Useful add-on to the Sony PXW-FX9 setupTo expand the Sony PWX-FX9 setup with battery packs, break out boxes etc. Chrosziel offers a rear rod clamp für the LWS 401-FX9. Only one screw is needed to easily mount the rear rod clamp to the lightweight support. It offers two 15 mm rod insertions that can be comfortably fixed by a locking screw.IN THE BOX 2 rosettes V-Lock-Plate 401-FS7/5-03 Tripod Adapter Plate 2 rods Ø 15mm length: 205mm  

CDM-100 Chrosziel's Digital Motor, 24V operating voltage, with cable 800mm length and Lemo 7-Pin 1B standard connector.With the Digital Motor CDM-100, we developed an extremely light weight, silent, small and horizontally aligned lens motor. It perfectly suites Gimbal, Drone and SteadiCam applications.FEATURESPerfect for Gimbals, Drones and SteadiCam Horizontally aligned Extremely light weight Extremely silent Very small and short housing Motor housing with standard 19mm diameter Smart gear attachement for secure operation and fast exchange Two gear diameters (40 and 60mm), even for large lens pitches Fixed motor cable additionally reducing motor size and weight New, Universal Rod Clamp with integrated captive slider – quickly and easily adjustable for use with Ø 15mm or Ø 19mm rodsTechnical detailsDimensions: L 63 mm, max. Diameter 25 mm (without gear) Weight (without clamp): 97g without gear, ca. 110g with small gear Voltage: max. 24V Cable length: 70cm Connector Lemo 1B 7-Pin Two gears: Ø 40mm & Ø 60mm with mod 0.8 Gear Diameter Ø 40mm with mod 0.5 (CDM-D40-M05) or 0.6 (CDM-D40-M06) additionally available 15mm / 19mm Universal Rod Clamp Compatibility Chrosziel Digital Motor CDM-100 compatible with: Chrosziel MagNum, Chrosziel Aladin MK II and 3rd party brands Chrosziel Digital Motor CDM-100S compatible with: Chrosziel MagNum mini, Freefly Movi and othersIn the BoxEU15-19 Universal Rod Clamp for Ø 15/19mm CDM-D40 Gear Drivemod. 0.8, Ø 40mmCDM-D60 Gear Drivemod. 0.8, Ø 60mm

CDM-100M Lens Motor Freefly MoVi Pro & MoVi XL GimbalPerfect for (focus, iris, zoom) lens controlDigital Motor CDM-100M with connector for Freefly MoVI Pro  & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm.FEATURESLIGHTWEIGHT97 grams = less than a chocolate barCOMPACT63 mm length & 19 mm diameter = small as a pinkyENERGY EFFICIENT250 mAh at 22 V = power consumption lowered by 80 %MOLEX MICROFIT 3.0Molex MicroFit 3.0 6-Pin connector = perfect for Freefly MoVi Pro gimbalLightweight, energy efficient, and versatile: Chrosziel CDM-100M This is the reason why Chrosziel is absolutely committed to designing the CDM-100M consistently for compact dimensions and weight reduction. With a length of 63 mm, a diameter of 19 mm and 97 grams, the Gimbal motor is extremely compact and lightweight. The integrated cable including the Molex MicroFit 3.0 6-pin connector saves additional weight. It can be conveniently connected to the camera stage to control focus, iris and / or zoom via the Freefly MoVi Controller, Freefly Mimic or Freefly Pilot. With a power consumption of only 250 mAh at 24 V the CDM-100M requires at least 80 percent less energy than other commercially available motors. Chrosziel supports operators of gimbal systems that require a special motor for optics in a light setup. This makes it possible to carry gimbal systems for a long time without fatigue and while saving a lot of battery power. IN THE BOX The scope of delivery includes two mod 0.8 gears with 40 and 60 mm diameter and one cable including connector. Also, included is a clamp which ensures a non-slip seat of the motor on 15 and 19 mm diameter rods through a captive reduction mechanism.

CDM-100S - Chrosziel's Digital Motor with small Lemo 7-Pin 0B connector, nominal operating voltage 24V, cable 700mm,incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm, Aswell for use with Freefly Movi and others.FEATURES Digital Motor CDM-100 Perfect for Gimbals, Drones and SteadiCams Horizontally aligned Extremely light weight Very small and short housing Motor Housing with Standard 19mm Diameter Smart gear attachement for secure operation and fast exchange Two gear diameters, even for large lens pitches Fixed motor cable additionally reducing motor size and weight Universal rod clamp with captive slider for Ø 15mm / 19mm rods Technical details: Dimensions: L 63 mm, max. Diameter 25 mm (without gear) Weight (without clamp): 97g without gear, ca. 110g with small gear Voltage: max. 24V Cable length: 70cm Connector Lemo 1B 7-Pin Two gears: Ø 40mm & Ø 60mm with mod 0.8 Gear Diameter Ø 40mm with mod 0.5 (CDM-D40-M05) or 0.6 (CDM-D40-M06) additionally available 15mm / 19mm Universal Rod ClampCompatibility Chrosziel Digital Motor CDM-100 compatible with:  Chrosziel MagNum, Chrosziel Aladin MK II and 3rd party brandsChrosziel Digital Motor CDM-100S compatible with: Chrosziel MagNum mini, Freefly Movi and othersIn the BoxCDM-100S with small Lemo 7-Pin 0B connectorCable 700mmEU15-19 Universal Rod Clamp for Ø 15/19mmCDM-D40 Gear Drive, mod. 0.8, Ø 40mmCDM-D60 Gear Drive, mod. 0.8, Ø 60mm

Kit Digital Motor FIZ for Freefly MoVI Pro & MoVi XL with 3x CDM-100M, each CDM-100M with connector for Freefly MoVI Pro & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm.CDM-100M LENS MOTOR FREEFLY MOVI PRO & MoVi XL GIMBAL Perfect for (focus, iris, zoom) lens control Digital Motor CDM-100M with connector for Freefly MoVI Pro & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm. FEATURESLIGHTWEIGHT 97 grams = less than a chocolate barCOMPACT63 mm length & 19 mm diameter = small as a pinkyENERGY EFFICIENT250 mAh at 22 V = power consumption lowered by 80 %MOLEX MICROFIT 3.0Molex MicroFit 3.0 6-Pin connector = perfect for Freefly MoVi Pro gimbalLIGHTWEIGHT, ENERGY EFFICIENT, AND VERSATILE: CHROSZIEL CDM-100M This is the reason why Chrosziel is absolutely committed to designing the CDM-100M consistently for compact dimensions and weight reduction. With a length of 63 mm, a diameter of 19 mm and 97 grams, the Gimbal motor is extremely compact and lightweight. The integrated cable including the Molex MicroFit 3.0 6-pin connector saves additional weight. It can be conveniently connected to the camera stage to control focus, iris and / or zoom via the Freefly MoVi Controller, Freefly Mimic or Freefly Pilot. With a power consumption of only 250 mAh at 24 V the CDM-100M requires at least 80 percent less energy than other commercially available motors. Chrosziel supports operators of gimbal systems that require a special motor for optics in a light setup. This makes it possible to carry gimbal systems for a long time without fatigue and while saving a lot of battery power. In the Box:3x CDM-100M Digital Motor FIZ for Freefly MoVI Pro, each CDM-100M with connector for Freefly MoVI Pro Gimbal Camera Stabilizer24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plugEU15-19 Universal Rod Clamp for Ø 15/19mmCDM-D40 Gear Drive, mod. 0.8, Ø 40mmCDM-D60 Gear Drive, mod. 0.8, Ø 60mm