Light weight support for Sony PXW-FX9, with integrated shoulder pad, 2 rosettes, V- Lock-Plate, 401-FS7/5-03 Tripod Adapter Plate2 rods Ø 15mm, l. 205mm.LIGHTWEIGHT SUPPORT (LWS) FOR SONY FX9 CAMERAS  Features of the LightWeight Support 401-FX9: new comfortable ergonomic soft shoulder pad, two rosette (right and left), numerous 3/8″ & 1/4″ fastening points incl. ARRI anti-twist safeguard, compatibility to QuickRelease and tripod adapter plates and optional rear rod support.The LightWeight Support can be modularly used with industry standard QuickLock Plates. The Chrosziel QuickLock Plate 401-150 is suitable for all cameras which are equipped with wedge plate connections (V mount) in the front and a mounting bracket behind the shoulder support. The QuickLock Plate connects the camera quickly and easily, and even after decades of use. LIGHT AS A FEATHER: THE SHOULDER PAD OF THE 401-FX9 LIGHTWEIGHT SUPPORT The shoulder pad under the light support can be moved over a wide range. A lever clamp mechanism with external lever access allows the user to slide it on the shoulder. This allows him to quickly correct the balance of the camera during operation. The pad is tapered to fit the shoulder and has an elevation toward the neck for side protection. After fully opening the lever clamp, the pad can be removed and inserted rotated 180 degrees, so that one can equally use the light support on the left or right shoulder. The pad itself is manufactured using a new process from the automotive industry in a special mold with a molded core surrounded by an elastic material with a strong durable outer shell. This multi-layer construction results in high comfort and fatigue-free work.User feedback played a key role while designing the LightWeight Support 401-FX9.The result is a completely re-design of the shoulder pad:Use of a two component cushioning material Shoulder pad adapts to the physical conditions when under pressure Shoulder pad is adjustable (forward and backward) FITS PERFECTLY Secure hold with tripod adpter plate 401-FS7/5-03The standard scope of delivery of the LightWeight Support 401-FX9 consists of a tripod adapter plate 401-FS7/5-03. With the tripod adapter plate the lightweight support can be directly and securely mounted to a tripod without a VCT QuickLock Plate (universal plate). It is just necessary to replace the pre-assembled V Lock by the tripod adapter plate.CLAMPS ONLY WHEN NEEDED: REAR ROD CLAMP FOR 15 MM RODS Useful add-on to the Sony PXW-FX9 setupTo expand the Sony PWX-FX9 setup with battery packs, break out boxes etc. Chrosziel offers a rear rod clamp für the LWS 401-FX9. Only one screw is needed to easily mount the rear rod clamp to the lightweight support. It offers two 15 mm rod insertions that can be comfortably fixed by a locking screw.IN THE BOX 2 rosettes V-Lock-Plate 401-FS7/5-03 Tripod Adapter Plate 2 rods Ø 15mm length: 205mm  

Light weight support for Sony ILME-FX6, with integrated shoulder pad, 2 rosettes, VLock-Plate, Tripod Adapter Plate, 2 rods Ø 15mm, l. 205mm.Lightweight support (LWS) for Sony FX6 cameras Four positions are provided on the light support for the 3-point camera attachment, which allows the camera to be attached to the light support without distortion. This guarantees parallel alignment of the optical axis to the light support and the attached compendium. A specially hardened V-lock plate allows the light support to be used on the tripod with the standard Sony VCT-14/VCT-U14 adapter plate, the Chrosziel V-Mount Quicklock plate (401-150) or compatible adapter plates from other manufacturers in a stable two-point lock. The V-Lock plate under the light support can be easily exchanged by the user for the tripod adapter plate (401-FS7/5-03). This allows other adapter plates, such as the Sachtler plate, to be firmly screwed to the light support. The attachment points of common adapter plates are taken into account. Both the Chrosziel V-Lock plate and the tripod adapter plate have captive screws.The shoulder pad under the light support can be moved over a wide range. A lever clamp mechanism with external lever access allows the user to slide it on the shoulder. This allows him to quickly correct the balance of the camera during operation. The pad is tapered to fit the shoulder and has an elevation toward the neck for side protection. After fully opening the lever clamp, the pad can be removed and inserted rotated 180 degrees, so that one can equally use the light support on the left or right shoulder. The pad itself is manufactured using a new process from the automotive industry in a special mold with a molded core surrounded by an elastic material with a strong durable outer shell. This multi-layer construction results in high comfort and fatigue-free work.At the front of the light support, 15mm tubes are attached with one clamping lever each. On both sides of the light support there are Hirth rosettes (Arri compatible) for attaching handles or other accessories.The optional rear tube clamp can be screwed to the rear end of the light support. With additional 15mm tubes, battery adapter plates, video transmitters, video recorders or other accessories can be attached behind the camera in a variable and movable way. Alternatively, there are four screw points (1/4 and 3/8" with Arri anti-twist protection) at the top of the rear part of the light support for accessories.The Chrosziel light support of the FX6 is the optimal result of stability and weight due to a sophisticated design. It is manufactured in Germany.INCLUDED IN BOXIntegrated shoulder pad2 rosettesVLockPlateTripod Adapter PlateOne pair of rods: Diameter: 15mm, Length: 205mm

LIGHT WEIGHT SUPPORT (LWS) 401-C700 for Canon EOS C700 / C700 FF & GS camerasLight Weight Support for Canon EOS C700 (FF) with integrated shoulder pad, 2 rosettes, V-Lock for quick-release plate, rear rod clamp, Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm.COMPATIBLE! Sony V-Mount for Chrosziel QuickLock Plate 401-150, Sony VCT-14 or Arri V-Lock-Baseplate Due to the interchangeable V-Lock Plate the Light Weight Support (LWS) 401-C700 can be modularly used with QuickLock Plates. For instance with the Chrosziel QuickLock Plate 401-150. This Plate is suitable for all cameras which are equipped with wedge plate connections (V-mount) in the front and a mounting bracket behind the shoulder support. Demount it quickly and easily to install the Tripod Adapter Plate with four srews. MULTIFUNCTIONAL! Combined with the Chrosziel DigiCine Bridgeplate (401-F235). The Tripod Adapter Plate 401-FS7-5-03 also serves as adapter for Chrosziel’s DigiCine Bridge Plate 401-F235 and for direct tripod mounting. The Tripod Adapter Plate replaces the V-Lock Plate. STEADY! Secure hold with the Tripod adapter plate (401-FS7-5-03) Our Light Weight Support (LWS) 401-C700 is currently delivered with a Tripod Adapter Plate (401-Fs7-5-03). The plate can be used in exchange with the already built-in V-lock plate used. Thus, the support – also without an intermediately mounted quicklockpatte – can be used directly and securely on a tripod. USER-FRIENDLYOptional accessory Handgrip Extender 403-40 The new Chrosziel Universal Handgrip Extender (403-40) is the perfect complement for your Sony PXW-FS5 when shooting from the shoulder. The Handgrip has two Hirth Rosettes and is extendable between 175 and 250mm. The Handgrip is universal and can be used not only with the Canon C700 but also with other cameras. EXTENSIONOptional accessory Our high quality leather handgrips in a set: can be extended, rotated and pivoted, with rosette connection. The Chrosziel handgrips (403-30) are available as an optional accessory to the Light Weight Support 401-C700. You own ergonomically designed handpieces made of genuine leather. The handles are also universally usable on all cameras and mount with the internationally used Hirth joint with M6 thread.